Reset Multicast Forwarding-Table - 3Com 5500G-EI Command Reference Manual

248 C 7: U M
HAPTER SING
reset multicast
forwarding-table
P C
ULTICAST ROTOCOL OMMANDS
Use the
undo multicast routing-enable
By default, IP multicast routing is disabled.
The system will not forward any multicast packet when IP multicast routing is
disabled.
Related commands:
Example
Enable IP multicast routing.
<SW5500>system-view
System View: return to User View with Ctrl+Z
[SW5500]multicast routing-enable
Syntax
reset multicast forwarding-table [ statistics ] { all | {
group-address
source-address
incoming-interface
View
User View
Parameter
If it is selected, the system clears the statistic information of MFC
statistics:
forward entries. Otherwise, the system clears MFC forward entries.
All MFC forward entries.
all:
group-address
:
Specifies Mask of group address
group-mask :
group-mask-length
source-address
Specifies mask of source address.
source-mask :
source-mask-length
incoming-interface:
interface-type interface-number
Description
Use the

reset multicast forwarding-table

entries or statistic information of MFC forwarding entries.
Type in the source address first and group address after in the command, ensure
that both addresses are valid. The system prompts error information if invalid
addresses are entered.
igmp enable, pim dm
group-mask | group-mask-length
[ mask {
source-mask | source-mask-length
[ mask {
interface-type interface-number
Specifies group address.
Specifies mask length of group address.
:
Specifies source address.
:
Specifies mask length of source address.
:
Specifies incoming interface for the forward entry.
:
to disable IP multicast routing.
, .
pim sm
Interface type and interface number.
command to clear MFC forwarding
} ] |
} ] |
} * }