Default Tag - 3Com 5500G-EI Command Reference Manual

182 C 6: U R
HAPTER SING

default tag

P C
OUTING ROTOCOL OMMANDS
Parameter
Enter a limit on the number of imported external routes, in the range 200
routes
to 2147483647. By default, the limit is 1000.
Description
Use the
default limit
imported routes.
Use the
undo default limit
OSPF can import external routing information and advertise them to the whole AS.
Importing too many external routes at once can greatly affect the performance of
the device.
Related commands:
Example
To specify a limit of 200 imported external routes, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]router id 1.1.1.1
[SW5500]ospf
[SW5500-ospf-1]default limit 200
Syntax
default tag tag
undo default
View
OSPF View
Parameter
tag Enter a tag number, in the range 0 to 4294967295.
Description
Use the
default tag
redistributes an external route.
Use the
undo default tag
redistributes the external route.
OSPF requires a default tag when redistributing a route found by other routing
protocols.
Related command:
Example
To set a default tag of 10 to OSPF imported external routes, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
command to configure maximum number of allowed
command to restore the default value.
default interval
tag
command to configure the default tag of OSPF when it
command to restore the default tag of OSPF when it
.
default type
.