Igmp Host-Join; Igmp Host-Join Port - 3Com 5500G-EI Command Reference Manual

igmp host-join

igmp host-join port

Example
Configure that only the hosts contained in the access-list 2000 connected to the
port GigabitEthernet1/0/1 in VLAN-interface10 can be added to the multicast
group, which is configured to use IGMP version 2.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]interface GigabitEthernet 1/0/1
[SW5500-GigabitEthernet1/0/1]igmp group-policy 2000 vlan 10
Syntax
igmp host-join group-address
undo igmp host-join
View
LoopBack interface view
Parameter
: Multicast address of the multicast group that an interface will
group-address
join.
Description
Using
igmp host-join
ethernet switch to join a multicast group. Using
you can disable the configuration.
By default, a LoopBack interface does not join any multicast group.
For the related command, see
.
igmp group-policy
Example
Add LoopBack 0 to the multicast group at 225.0.0.1.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]interface LoopBack 0
[SW5500-LoopBack0]igmp host-join 225.0.0.1
Syntax
group-address
igmp host-join
interface_name
} [ to {
interface_name
} ]
undo igmp host-join
num interface_name
|
interface_name
} ]
View
VLAN Interface View
group-address
command, you can enable a LoopBack interface of an
igmp host-join port
interface_type interface_ num
port {
interface_type interface_ num
group-address
port {
interface_type interface_ num
} [ to {
IGMP Configuration Commands
undo igmp host-join
,
igmp host-join vlan
|
interface_type interface_
255
command,
and
|
|