Debugging; Display Diagnostic-Information - 3Com 5500G-EI Command Reference Manual

448 C 12: U
HAPTER SING

debugging

display
diagnostic-information
S M C
YSTEM ANAGEMENT OMMANDS
Syntax
module-name
debugging
undo debugging { all |
View
User view
Parameter
: Disable all the debugging.
all
Specify the module name.
module-name:
debugging-option:
Description
Use the
debugging
command to disable the system debugging.
debugging
By default, all the debugging processes are disabled.
The Switch provides various kinds of debugging functions for technical support
personnel and experienced maintenance staff to troubleshoot the network.
Enabling the debugging will generate a large amount of debugging information
and decrease the system efficiency. If the the
will adversely affect the operational performance of the network. Use the
debugging all
For the related commands, see
Example
Enable IP Packet debugging.
<SW5500>debugging ip packet
IP packet debugging switch is on.
Syntax

display diagnostic-information

View
All views
Parameter
None
Description
Use the
display diagnostic-information
information on all currently running modules. This information helps you to
monitor and troubleshoot your Switch 5500G-EI.
debugging-option
[
module-name
Debugging option.
command to enable the system debugging. Use the
command to disable all debugging.
display debugging
]
debugging-option
[
command is used, it
debugging all
.
command to view the configuration
] }
undo
undo