Timers; Traffic-Share-Across; Interface - 3Com 5500G-EI Command Reference Manual

176 C 6: U R
HAPTER SING

timers

traffic-share-across-

interface

P C
OUTING ROTOCOL OMMANDS
Syntax
timers { update update-timer-length | timeout timeout-timer-length} *
undo timers { update | timeout } *
View
RIP View
Parameters
update-timer-length
to 3600 seconds. The default value is 30 seconds.
timeout-timer-length
3600 seconds. The default value is 180 seconds.
Description
Use the
timers
update, timeout, and garbage-collection.
Use the
undo timers
By default, the values of period update, timeout, and garbage-collection timers
are 30 seconds, 180 seconds, and 120 seconds, respectively.
Generally, the value of the garbage-collection timer is fixed to 4 times the value of
the period update timer. Adjusting the period update timer will affect the
garbage-collection timer.
The modification of RIP timers takes effect immediately.
Related Command:
Example
Set the values of the Period Update timer and the Timeout timer of RIP to 10
seconds and 30 seconds respectively.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]rip
[SW5500-rip]timers update 10 timeout 30
Syntax
traffic-share-across-interface
undo traffic-share-across-interface
View
RIP View
Parameter
None
Enter the value of the period update timer, ranging from 1
Enter the value of the timeout timer, ranging from 1 to
command to modify the values of the three RIP timers: period
command to restore the default settings.
display rip