Rmon Prialarm - 3Com 5500G-EI Command Reference Manual

[SW5500-GigabitEthernet1/0/1]undo rmon history 15

rmon prialarm

Syntax
rmon prialarm
delta | absolute | changeratio } rising-threshold
event-entry1
entrytype { forever | cycle
undo rmon prialarm
View
System view
Parameter
entry-number:
alarm-var:
several integer MIB node instances. The node can be OID in dotted notation.
alarm-des:
sampling-timer:
measured in seconds.
delta | absolute | changeratio:
absolute ratio or change ratio.
threshold-value1:
0.
event-entry1:
ranging from 0 to 65535.
threshold-value2:
0.
event-entry2:
from 0 to 65535.
forever | cycle
cycle-period
owner
ranges from 1 to 127.
Description
Use the
table. Use the
extended RMON alarm table.
The number of instances can be created in the table depends on the hardware
resource of the product.
entry-number alarm-var
falling-threshold
entry-number
Specifies the entry number, ranging from 1 to 65535.
Specifies the alarm variable, which can be an arithmetic expression of
Specifies the alarm description with a length ranging from 1-256;
Sets the sampling interval, ranging from 10 to 65535 and
Rising threshold value, specified with a number greater than
Corresponding event number to the upper limit threshold value,
Falling threshold value, specified with a number greater than
Event number corresponding to the falling threshold, ranging
cycle-period:
specifies the functional cycle of the instance.
Specifies the creator of the line. Length of the character string
text
:
command to add an entry to the extended RMON alarm
rmon prialarm
undo rmon prialarm
RMON Configuration Commands
alarm-des
[
threshold-value2 event-entry2
cycle-period } [ owner
Specifies the sampling type as delta ratio,
Specifies the type of the alarm instance line.
command to delete an entry from the
499
sampling-timer
] {
threshold-value1
text ]