Radius Protocol Configuration Commands; Accounting Optional; Data-Flow-Format - 3Com 5500G-EI Command Reference Manual

374 C 11: U
HAPTER SING
RADIUS Protocol
Configuration
Commands

accounting optional

data-flow-format

AAA RADIUS C
AND OMMANDS
[SW5500]domain marlboro.net
[SW5500-isp-marlboro.net]state block
[SW5500-isp-marlboro.net]quit
To set the user 3Com1 to be in the block state, enter the following:
[SW5500-user-3Com1]state block
This section describes how to use the RADIUS Protocol configuration commands
on your Switch.
Syntax
accounting optional
undo accounting optional
View
ISP Domain View
Parameter
None
Description
Use the
accounting optional
accounting option. Use the
selection of RADIUS accounting option.
By default, selection of the RADIUS accounting option is disabled.
If no RADIUS server is available or if RADIUS accounting server fails when the
accounting optional is configured, the user can still use the network resource,
otherwise, the user will be disconnected.
The user configured with
no longer send real-time accounting update packet or stop accounting packet.
The
accounting optional
the accounting that uses this RADIUS scheme.
Example
Enable the selection of RADIUS accounting of the RADIUS scheme named as
CAMS.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]radius scheme cams
New Radius scheme
[SW5500-radius-cams]accounting optional
Syntax
data-flow-format data { byte | giga-byte | kilo-byte | mega-byte }
packet { giga-byte | kilo-byte | mega-byte | one-packet }
command to enable the selection of the RADIUS
undo accounting optional
accounting optional
command in RADIUS Scheme View is only effective on
command to disable the
command in RADIUS scheme will