Reset Multicast Routing-Table - 3Com 5500G-EI Command Reference Manual

Related commands:
routing-table
Example
Clear the forwarding entry with address of 225.5.4.3 from the MFC forwarding
table.
<SW5500>reset multicast forwarding-table 225.5.4.3
Clear statistic information of the forwarding entry with address of 225.5.4.3 from
the MFC forwarding table.
<SW5500>reset multicast forwarding-table statistics 225.5.4.3
reset multicast Syntax
routing-table
reset multicast routing-table { all | {
group-mask |
source-mask |
interface-type interface-number
View
User View
Parameter
all:
group-address
group-mask
group-mask-length
source-address
source-mask
source-mask-length
incoming-interface:
interface-type interface-number
Description
Use the
the core multicast routing table, as well as MFC forwarding entries.
Type in the source address first and group address after in the command, ensure
that both addresses are valid. The system prompts error information if invalid
addresses are entered.
Related commands:
forwarding-table
reset pim routing-table
and
display multicast forwarding-table
group-mask-length
source-mask-length
All route entries in the core multicast routing table.
Specifies group address.
:
Specifies Mask of group address
:
Specifies mask length of group address.
:
Specifies source address.
:
Specifies mask of source address.
:
Specifies mask length of source address.
:
Specifies incoming interface for the forward entry.

reset multicast routing-table

reset pim routing-table
and
display multicast forwarding-table
Multicast Common Configuration Commands
,
reset multicast
group-address
source-address
} ] |
} ] | { incoming-interface
} } * }
Interface type and interface number.
:
command to clear route entries from
,
reset multicast
249
.
[ mask {
[ mask {
.