Info-Center Loghost Source; Info-Center Monitor Channel - 3Com 5500G-EI Command Reference Manual

info-center loghost
source
info-center monitor
channel
For the related commands, see
Example
Configure to send log information to the UNIX workstation at 202.38.160.1.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]info-center loghost 202.38.160.1
syntax

info-center loghost source

undo info-center source
View
System view
Parameter
interface-name
source
as the address of the interface specified by
interface is a VLAN interface.
Description
Use the
info-center loghost source
packets sent to the loghost as the address of the interface specified by the
parameter.
interface-name
Use the
undo info-center loghost source
the source address of the packets sent to the loghost.
This command takes effect only after the system logging is enabled.
Related commands:
info-center enable
Example
Set the source address of the packets sent to the loghost as the address of the
VLAN interface 1.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]info-center loghost source vlan-interface 1
Syntax

info-center monitor channel {

undo info-center monitor channel
View
System view
Parameter
Channel number, ranging from 0 to 9, that is, the system has
channel-number:
ten channels.
info-center enable
interface-name
Sets the source address of packets sent to the loghost
:
interface-name
command to set the source address of
command to cancel the setting of
,
display info-center
channel-number
Log Commands
,
display info-center
. Normally, the
.
channel-name
| }
465
.