3Com 5500G-EI Command Reference Manual page 365

View
System View
Parameter
Specifies an ISP domain name. The name is expressed with a character
isp-name :
string not exceeding 24 characters, excluding "/", ": ", "*", "? ", "<", and ">".
isp-name
default enable
.
isp-name
Restores the default ISP domain to
default disable:
Description
Use the command to configure an ISP domain or enter the view of an
domain
existing ISP domain. Use the
domain.
By default, a domain named default system has been created in the system. The
attributes of default system are all default values.
ISP domain is a group of users belonging to the same ISP. Generally, for a
username in the userid@isp-name format, taking
example, the isp-name (that is,
name. When 3Com 5500 Series Ethernet Switches control user access, as for an
ISP user whose username is in
userid part as username for identification and take isp-name part as domain
name.
The purpose of introducing ISP domain settings is to support the application
environment with several ISP domains. In this case, an access device may have
supplicants from different ISP domains. Because the attributes of ISP users, such as
username and password structures, service types, may be different, it is necessary
to separate them by setting ISP domains. In ISP Domain View, you can configure a
complete set of exclusive ISP domain attributes for each ISP domain, which
includes AAA schemes ( RADIUS scheme applied and so forth.)
For a Switch, each supplicant belongs to an ISP domain. The system supports up to
16 ISP domains. If a user has not reported its ISP domain name, the system will
put it into the default domain.
When this command is used, if the specified ISP domain does not exist, the system
will create a new ISP domain. All the ISP domains are in the
they are created.
Related commands:
access-limit
Example
To create a new ISP domain, marlboro.net, and enters its view, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]domain marlboro.net
New Domain added.
[SW5500-isp-marlboro.net]
AAA Configuration Commands
Enables the default ISP domain specified by
:
command to cancel a specified ISP
undo domain
gw20010608@3Com163.net
) following the @ is the ISP domain
3Com163.net
format, the system will take
userid@isp-name
,
radius scheme
.
default system
state when
active
, ,
state display domain
365
as an
.