Ccess; Logging In Commands; Authentication-Mode; Auto-Execute Command - 3Com 5500G-EI Command Reference Manual

24 C 1: U
HAPTER SING

Logging in Commands

authentication-mode

auto-execute command

S A C
YSTEM

CCESS

OMMANDS
telnet
■
user-interface
■
user privilege level
■
This section describes the commands that you can use to configure system access
and system security.
Syntax
authentication-mode { password | scheme | none }
View
User interface view
Parameter
Requires local authentication of password at log in.
password:
Requires local or remote authentication of username and password at
scheme:
log in.
Allows users to log in without username or password.
none:
Description
This command configures the authentication method for a user at log in.
Use the command
password authentication at login. To set the password, use
.
password
Use the command
local or remote user name and password authentication at login. The type of the
authentication depends on your network configuration. For further information,
see "AAA and RADIUS".
Use the command
username or password authentication.
By default, users logging in using the console port do not need to pass any
terminal authentication. Users logging in via modem or Telnet are required to
provide password authentication when they log in.
Example
To configure local password authentication, enter the following command:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]user-interface aux 0
[SW5500-ui-aux0]authentication-mode password
Syntax
auto-execute command
authentication-mode password
authentication-mode scheme
authentication-mode none
text
to prompt a user for local
set authentication
to prompt a user to provide
to allow a user to log in without