Startup Saved-Configuration; Ftp Server Configuration Commands - 3Com 5500G-EI Command Reference Manual

416 C 12: U
HAPTER SING
startup
saved-configuration
FTP Server
Configuration
Commands
S M C
YSTEM ANAGEMENT OMMANDS
If you do not enter the file-name parameter in this command, for the switches that
have specified the configuration file for booting, the current configurations will be
stored to the specified configuration file; and for the switches that have not
specified the configuration file for booting, the current configurations will be
stored to the default configuration file, 3comoscfg.cfg.
Related commands:
current-configuration, display saved-configuration.
Example
Get the current configuration files stored in flash memory.
<SW5500>save
The configuration will be written to the device.
Are you sure?[Y/N] y
Please input the file name(*.cfg)[flash:/sw5500cfg.cfg]:
Now saving current configuration to the device.
Saving configuration. Please wait .....
..........
startup saved
Syntax
startup saved-configuration [ unit
View
User view
Parameter
: Specify the Unit ID of switch.
unit unit-id
: The name of the configuration file. It is a string with a length of 5 to 56
cfgfile
characters.
Description
Use the

startup saved-configuration

file used for enabling the system for the next time.
The configuration file must have ".cfg" as its extension name and must be saved
under the root directory of the Flash.
For the related command, please see
Example
Configure the configuration file for the next start-up.
<SW5500>startup saved-configuration sw5500cfg.cfg
This section describes how to use the File Transfer Protocol (FTP) configuration
commands on your Switch 5500G-EI.
reset saved-configuration, display
unit-id
command to configure the configuration
display startup
] cfgfile