Voice Vlan; Voice Vlan Mac_Address - 3Com 5500G-EI Command Reference Manual

voice vlan

voice vlan mac_address

You can only run the Voice VLAN function on the port when all the Voice VLAN
features in system view and port view are enabled.
For the related command, see
Example
To enable the Voice VLAN features on port Ethernet1/0/2, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]interface Gigabitethernet1/0/2
[SW5500-GigabitEthernet1/0/2]voice vlan enable
Syntax
vlan_id
voice vlan
undo voice vlan enable
View
System View
Parameter
The VLAN ID for the Voice VLAN to be enabled, in the range of 2 to
vlan_id:
4094.
Description
Use the command to globally enable the Voice VLAN features of one
voice vlan
VLAN. Use the
undo voice vlan enable
VLAN features of one VLAN.
A specified VLAN must exist for a successful Voice VLAN enabling. You cannot
delete a specified VLAN that has enabled Voice VLAN and only one VLAN can
enable Voice VLAN features at one time.
For the related command, see
Example
Enable the Voice VLAN features on VLAN 2 (VLAN 2 already exists).
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]voice vlan 2 enable
Syntax
voice vlan mac-address oui
undo voice vlan mac-address
View
System View
Voice VLAN Configuration Commands
display voice vlan status
enable
command to globally disable the Voice
display voice vlan status
mask oui_mask
oui
.
.
[ description string
87
]