Port Link-Type - 3Com 5500G-EI Command Reference Manual

Parameter
vlan_id_list:
4094. The hybrid port will be added to the specified VLANs. This can be a single
VLAN, a series of individual VLANs separated by a space, or the the first VLAN in a
range of VLANs (
You can enter up to ten
command.
tagged:
untagged:
Description
Use the
The port needs to have been made a hybrid port before you can do this. See the
related command below. Use the
the port from the specified VLAN(s).
A hybrid port can belong to multiple VLANs. A port can only be added to a VLAN
if the VLAN has already been created. See the
Related command:
Example
To add the port Ethernet1/0/1 to VLAN 2, VLAN 4 and all VLANs in the range 50 to
100 as a tagged port, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]interface Gigabitethernet 1/0/1
[SW5500-GigabitEthernet1/0/1]port hybrid vlan 2 4 50 to 100 tagged

port link-type

Syntax
port link-type { access | hybrid | trunk | xrn-fabric }
undo port link-type
View
Ethernet Port View
Parameter
access:
hybrid:
trunk:
Enter a VLAN ID, or more than one VLAN ID, in the range 2 to
vlan_id last_vlan_id
to
vlan_id
Enter to tag the port for the specified VLAN.
Enter to leave the port untagged for the specified VLAN.
command to add the port to the specified VLAN(s).
port hybrid vlan
port link-type
Enter to configure the port as an access port.
Enter to configure the port as a hybrid port
Enter to configure the port as a trunk port.
Ethernet Port Configuration Commands
).
parameters in one
port hybrid vlan
undo port hybrid vlan
vlan vlan-vid
.
63
command to remove
command.