Stp Timer Hello; Stp Timer Max-Age - 3Com 5500G-EI Command Reference Manual

stp timer hello

stp timer max-age

Use the
undo stp timer forward-delay
forward delay time.
The value of forward delay is related to the "diameter" of the switching network.
The more extensive the switching network is, the longer the forward delay should
be set. You can use this command to modify the value of forward delay. The
default value, 1500, is recommended.
Related commands:
stp timer hello
Example
To set the forward delay of the device to 2000 centiseconds, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]stp timer forward-delay 2000
Syntax
stp timer hello centiseconds
undo stp timer hello
View
System View
Parameter
Specifies the value of hello time in centisecond, ranging from 100
centiseconds :
to 1000. By default, the value is 200 centiseconds.
Description
Use the
stp timer hello
Use the
undo stp timer hello
The Ethernet Switch transmits RSTP packets every hello time seconds. A longer
hello time can ease the CPU load of the Switch, but it will also affect the
performances of RSTP in how rapidly it responds to changes. The
command can be used to modify the value of hello time. The default value
hello
is recommended.
Related commands:
stp timer forward-delay
.
transmit-limit
Example
To set the hello time of the Switch to 300 centiseconds, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]stp timer hello 300
Syntax
centiseconds
stp timer max-age
RSTP Configuration Commands
command to restore the default
,
stp timer max-age
command to configure hello time of the Switch.
command to restore the default hello time.
,
.
stp timer
,
stp timer max-age
337
stp