Password - 3Com 5500G-EI Command Reference Manual

undo local-user {
lan-access | ssh | terminal }]}
View
System view
Parameter
user_name
":", "*", "?", "<" and ">". (The @ character can be used once in a
that part of the user name which precedes the @ symbol must not be more than
55 characters in length. The user-name is case-insensitive, so that UserA is the
same as usera.
Specifies all users.
all:
service-type:
telnet:
ftp:
lan-access:
Ethernet-accessing users.
:Specifies that the user type is SSH.
ssh
terminal
the terminal service (login from the Console, AUX or Asyn port).
Description
Use the
view.
Use the
user or all users. By default, a local user is not configured.
Related commands:
Example
To add a local user named guest, enter the following:
<SW5500>system
System View: return to User View with Ctrl+Z.
[SW5500]local-user guest
[SW5500-luser-guest]

password

Syntax
password {simple | cipher }
undo password
View
Local user view
user_name
Enter a local user name, up to 80 characters in length, excluding "/",
:
Specifies the service type, which can be one of the following:
Specifies the user type of Telnet.
Specifies the user type of FTP.
Specifies the user type of LAN access, which mainly refers to
: Specifies that the user type is terminal which refers to users who use
command to configure a local user and enter the local user
local-user
command to cancel a specified local user, a type of
undo local-user
display local-user
FTP Server Configuration Commands
| all [ service-type { telnet | ftp |
,
service-type
password
419
user_name
.
;