Mac Address Table Management Commands; Display Mac-Address - 3Com 5500G-EI Command Reference Manual

MAC Address Table
Management
Commands

display mac-address

View
User view
Parameter
IP address or hostname of the TFTP server. The name of the TFTP
tftp-server :
server should be a string ranging from 1 to 20 characters.
Specify the filename of the source file which is saved on the switch.
source-file
:
Specify the filename of the destination file which will be saved on the
dest-file :
TFTP server.
Description
Use the command to upload a file from the switch to the specified
tftp put
directory on the TFTP server and save it with a new name.
Related commands:
tftp get
Example
<
SW5500>tftp 1.1.3.214 put sw5500cfg.txt temp.txt
This section describes the commands you can use to manage the MAC Address
Table on your Switch 5500G-EI.
Syntax
display mac-address [
| blackhole ] [ interface {
interface-num
} ] [ vlan
View
All views
Parameter
: Specify the MAC address.
mac-addr
: Specify the VLAN ID.
vlan-id
Static table entry, lost after resetting switch.
static:
Dynamic table entry, which will be aged.
dynamic:
: Blackhole table entry, the packet with this destination MAC address
blackhole
will be discarded.
Specify the interface type.
interface-type:
Specify the interface number.
interface-num:
Specify the interface name.
interface-name:

MAC Address Table Management Commands

.
mac-addr vlan-id
[ vlan
interface-name
vlan-id
] [ count ] ]
] | [ static | dynamic
interface-type
|
431