File System Management Commands - 3Com 5500G-EI Command Reference Manual

402 C 12: U
HAPTER SING
File System
Management
Commands
S M C
YSTEM ANAGEMENT OMMANDS
ntp-service unicast-peer
■
ntp-service unicast-server
■
SSH Configuration Commands
debugging ssh server
■
display rsa local-key-pair public
■
display rsa peer-public-key
■
display ssh server
■
display ssh user-information
■
peer-public-key end
■
protocol inbound
■
public-key-code begin
■
public-key-code end
■
rsa local-key-pair create
■
rsa local-key-pair destroy
■
rsa peer-public-key
■
ssh server authentication-retries
■
ssh server rekey-interval
■
ssh server timeout
■
ssh user assign rsa-key
■
ssh user username authentication-type
■
This section describes the commands you can use to manage the file system on
your Switch 5500G-EI.
In switches supporting the XRN feature, the file path must start with
"unit[No.]>flash:/:", the [No.] is the unit ID. For example, suppose unit ID is 1, and
the path of the "text.txt" file under the root directory must be
"unit1>flash:/text.txt".
cd Syntax
directory
cd
View
User view
Parameter
Destination directory. The default directory is the working path
directory:
configured by the user when the system starts.
Description
Use the command to change the current user configuration path on the
cd
Switch.