Super Password; Sysname - 3Com 5500G-EI Command Reference Manual

42 C 1: U S
HAPTER SING YSTEM

super password

sysname

A C
CCESS OMMANDS
<SW5500>super 3
Password:
The password prompt displays only if you set a password using the
command.
password
Syntax
super password [ level
undo super password [ level
View
System View
Parameter
Enter a user level in the range 1 to 3. The default is 3. The password you
level:
enter is set for the specified level.
Configure to display the password in encrypted text.
cipher:
Configure to display the password in plain text.
simple:
If the authentication is in the
password
:
plain text. If the authentication is in the
in encrypted text or in plain text. If a plain text password is entered when cipher
mode has been selected, the password will be displayed in the configuration
settings as encrypted. A plain text password is a sequential character string of no
more than 16 digits, for example, 3Com918. The length of an encrypted password
must be 24 digits and in encrypted text, for example,
_(TT8F]Y\5SQ=^Q`MAF4<1!!.
Description
Use the
super password
user from a lower level to a higher level. To prevent unauthorized users from illegal
intrusion, user ID authentication is performed when users switch from a lower
level to a higher level. For the sake of confidentiality, on the screen the user cannot
see the password that he entered. The user has three chances to input valid
password, and then switch to the higher level. Otherwise, the original user level
will remain unchanged. Use the
password settings.
The password in plain text is required when performing authentication, regardless
of whether the configuration is plain text or encrypted text.
Example
To set the password for level 3 to
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]super password level 3 simple zbr
Syntax
sysname text
level
]{ simple | cipher }
level ]
simple
mode, the password can be either
cipher
command to configure the password for changing the
undo super password
, type the following:
zbr
super
password
mode, the password must be in
command to cancel the