Poe Max-Power - 3Com 5500G-EI Command Reference Manual

96 C 4: U P
HAPTER SING OWER OVER

poe max-power

E (P E) C
THERNET O OMMANDS
View
System View
Parameter
None
Description
Use the
poe legacy enable
function.
Use the
undo poe legacy enable
detect function.
PDs compliant with 802.3af standards are called standard PDs.
By default, the nonstandard-PD detect function is disabled.
Example
Enable the nonstandard-PD detect function.
[SW5500]poe legacy enable
Legacy detection is enabled
Disable the nonstandard-PD detect function.
[SW5500]undo poe legacy enable
Legacy detection is disabled
Syntax
poe max-power max-power
undo poe max-power
View
Ethernet Port View
Parameter
Maximum power distributed to the port, ranging from 1000 to
max-power:
15400 mW.
Description
Use the
poe max-power
supplied by current port.
Use the
undo poe max-power
by current port to the default value.
By default, the maximum power that a port can supply is 15400 mW.
command to enable the nonstandard-PD detect
command to disable the nonstandard-PD
command to configure the maximum power that can be
command to restore the maximum power supplied