Display Stop-Accounting-Buffer - H3C s3100 series Command Manual

Session ctrl pkt
Set policy result
RADIUS sent messages statistic:
Auth accept
Auth reject
EAP auth replying
Account success
Account failure
Cut req
Set policy result
RecError_MSG_sum:0
Timer_Err
State Mismatch
No-response-acct-stop packet =0
Discarded No-response-acct-stop packet for buffer overflow =0

display stop-accounting-buffer

Syntax
display stop-accounting-buffer { radius-scheme radius-scheme-name | session-id session-id |
time-range start-time stop-time | user-name user-name }
View
Any view
Parameters
radius-scheme radius-scheme-name: Displays the buffered stop-accounting requests of a specified
RADIUS scheme. Here, radius-scheme-name is a string of up to 32 characters.
session-id session-id: Displays the buffered stop-accounting requests of a specified session. Here,
session-id is a string of up to 50 characters.
time-range start-time stop-time: Displays the buffered stop-accounting requests generated in a
specified time range. Here, start-time is the start time of the time range, stop-time is the end time of the
time range, and both are in the format of hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd. The
parameters here are used to display all the buffered stop-accounting requests generated from start-time
to stop-time.
user-name user-name: Displays the buffered stop-accounting requests of a specified user. Here,
user-name is a string of up to 184 characters.
Description
Use the display stop-accounting-buffer command to display the non-response stop-accounting
requests buffered in the device.
, Num=0
, Num=0
, Num=0
, Num=0
, Num=0
, Num=0
, Num=0
, Num=0
, Num=0
SndMSG_Fail_sum :0
:0 Alloc_Mem_Err
:0 Other_Error
, Err=0
, Err=0
:0
:0
1-42
, Succ=0
, Succ=0