One-Step Patch Installation; Step-By-Step Patch Installation; Step-By-Step Patch Installation Task List; Configuring The Patch File Location - H3C SR6600 Fundamentals Configuration Manual

One-Step Patch Installation

To install patches in one step, use the patch install command. After you execute the command, the
system displays the message "Do you want to continue running patches after reboot? [Y/N]:".
Entering y or Y: All the specified patches are installed, and turn to the RUNNING state from IDLE.
This equals execution of the commands patch location, patch load, patch active, and patch run.
The patches remain RUNNING after system reboot.
Entering n or N: All the specified patches are installed and turn to the ACTIVE state from IDLE.
This equals execution of the commands patch location, patch load and patch active. The
patches turn to the DEACTIVE state after system reboot.
Follow these steps to install the patches in one step:
To do...
Enter system view
Install the patches in one step
The patch matches the card type and software version.
The patch install command changes the patch file location specified with the patch location
command to the directory specified by the patch-location argument of the patch install command.
To uninstall all patches in one operation, use the undo patch install command, which has the
same effect as

Step-by-Step Patch Installation

Step-by-Step Patch Installation Task List

Configuring the Patch File Location

Loading a Patch File
Activating Patches
Confirming Running Patches
Configuring the Patch File Location
If you save the patch files to other storage media except the CF card on the device, you need to specify
the directory where the patch files locate with the patch-location argument. Then the system loads the
appropriate patch files from the specified directory. If the device has only one storage medium, you do
not need to execute this command.
Follow these steps to configure the patch file location:
Use the command...
system-view
patch install patch-location
Step-by-Step Patch Uninstallation.
Task
Optional
Required
Required
Optional
12-142
Remarks
—
Required
Remarks