Main Board Probe Commands; Display Hardware Internal Pcicfg; Display Hardware Internal Access-Space - H3C MSR Series Probe Command Reference

Main board probe commands

display hardware internal pcicfg

Use display hardware internal pcicfg to display the contents of the PCI configuration space, including the
contents of the PCI-E configuration space.
Syntax
display hardware internal pcicfg slot-num pci-num bus-num dev-num func-num pci-offset width-num
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
slot-num: Specifies a slot number. It must be 0 for an MSR 2600 or MSR 3600, and must be in the range
of 0 to 2 for an MSR 5600.
pci-num: Specifies the number of the system's PCI-E controller (RC), in the range of 0 to 1. The router can
use up to two RCs.
bus-num: Specifies the PCI bus number in the range of 0 to 255.
dev-num: Specifies the PCI device number in the range of 0 to 31.
func-num: Specifies the PCI function number in the range of 0 to 7.
pci-offset: Specifies the PCI configuration register offset in the range of 0x0000 to 0xFFFF.
width-num: Specifies the PCI configuration access bit width in bytes. Valid values include 1, 2, and 4.
Usage guidelines
This command reads the PCI configuration space, including the PCI-E configuration space. To use this
command, you must do the following:
Obtain the PCI device's PCI bus number, device number, and function number.
•
Specify an offset for the command.
•

display hardware internal access-space

Use display hardware internal access-space to display hardware space information.
Syntax
display hardware internal access-space slot-num acc-addr width-num
Views
Probe view
19