Configure controller settings.
The items which can be set are shown below. When each item part is touched, the respective setting becomes possible.
Assign Ethernet I/F
Channel no. (Ch No.) setting
5 V power supply
Communication Detail Setting
Change the assignment of channel No. and communication driver name of the device connected using the
Change the assignment of channel No. and communication driver name.
Set the channel numbers of the communication interface (Standard interface/Extend interface).
When connecting a controller to the RS-232 interface, whether to supply 5 V DC power or not to the controller
through 9 pins can be selected.
Set communication parameters of communication devices.
2 - 49