Mitsubishi Electric GT14 User Manual page 1442

Hide thumbs Also See for GT14:

Table of Contents

(1) Special Interrupt Code

The following shows the compatibility between the

special interrupt codes and the event types.

Interrupt Code

Output when the screens are switched according to the

change in the switching device values assigned to 1/2.

*1: Base Screen or Overlap Window 1/2 switches

independently without being interlocked.

(Example of output)

When all the switching device values assigned to

the Base Screen and Overlap Window1/2 are

changed, 3 special interrupt codes are output.

Output when Numerical/ASCII Input is completed.

Output when Recipe data transfer (read-out, write-in) is

Output when Bar code and RFID data has been

imported into GOT

(1) Communication interface setting by Utility

The communication interface setting can be

changed on the Utility's [Communication setting]

after writing [Communication Settings] of project

For details on the Utility, refer to the following

11. COMMUNICATION INTERFACE SETTING

(COMMUNICATION SETTING)

(2) Precedence in communication settings

When settings are made by GT Designer3 or the

Utility, the latest setting is effective.

61. MICROCOMPUTER CONNECTION (SERIAL)

61.6 GOT Side Settings

and Overlap Window

Chapters

Table of Contents