23.6.2 Accessing by CW Configurator
The following shows the procedure to set the FA
transparent function of CW Configurator.
When connecting the GOT and personal
computer with USB
(1) Connecting the GOT and PLC in Ethernet
connection
1.
Click [Online]
[Connection Destination] on CW
Configurator.
2.
[Connection Channel Setup] is displayed.
3.
Set [Connection Channel Setup].
PC side I/F
PLC side I/F
Other Station Setting : No Specification
23 - 52
23. FA TRANSPARENT FUNCTION
23.6 Personal Computer Side Setting
: USB
: GOT
4.
Double-click [GOT] of the PLC side I/F to display
[PLC side I/F Detailed Setting of GOT].
5.
On the [PLC side I/F Detailed Setting of GOT], mark
the [via GOT (Ethernet) transparent mode] checkbox
and click [Setting].
6.
By clicking [Setting], the [GOT (Ethernet) Transparent
Setting] is displayed.
Here, set the built-in Ethernet port CPU or Ethernet
module, which is firstly connected via a GOT.
7.
Set [Ethernet Built-in CPU] for [PLC Type].