Cogo Calculation - Intersections Method; Intersection With Bearing - Bearing - Leica GPS1200 Series Technical Reference Manual

COGO
37.6
37.6.1
Description

COGO Calculation - Intersections Method

Intersection with Bearing - Bearing

The COGO intersection calculation bearing - bearing calculates the intersection point of two
lines. A line is defined by a point and a direction.
Elements that must be known are
• the coordinates of two points.
• the direction from these known points to the COGO point.
• offsets if required and configured.
The coordinates of the known points
• may be taken from the active job.
• may be manually occupied during the COGO calculation.
• may be entered.
Points with full coordinate triplets and position only points can be used. Position only is calcu-
lated, height can be typed in.
GPS1200 820