Configuring Reference Line - Leica GPS1200 Series Technical Reference Manual

Reference Line
41.3
Description
Access step-by-step
REFLINE
Configuration,
General page

Configuring Reference Line

Allows options to be set which are used within the Reference Line application program.
These settings are stored within the configuration set.
Step Description
1. Refer to "41.2 Accessing Reference Line" to access REFLINE Reference Line/Arc
Begin.
2. CONF (F2) to access REFLINE Configuration.
This screen consists of the General page, the Checks page, the Heights page and the
Logfile page. The explanations for the softkeys given below are valid as indicated.
GPS1200
CONT (F1)
To accept changes and return to the screen
from where this screen was accessed.
DMASK (F3)
To edit the display mask currently being
displayed. Accesses CONFIGURE Define
Display Mask n. Available when <Display
Mask:> is highlighted on General page. Refer
to "19.2 Display Settings".
PAGE (F6)
To change to another page on this screen.
1016