Leica GPS1200 Series Technical Reference Manual page 1300

Volume Calculations GPS1200
SHIFT CONEC (F3) and SHIFT DISCO (F3)
To dial the number of the reference station
configured in the active configuration set and to
hang up immediately after the survey is
completed. Available for OCUPY (F1) or
STORE (F1) being displayed and for real-time
devices of type digital cellular phone or
modem. Available for <Auto CONEC: No> in
CONFIGURE GSM Connection.
SHIFT INIT (F4)
To select an initialisation method and to force a
new initialisation. Available for OCUPY (F1) or
STORE (F1) being displayed and for configura-
tion sets allowing phase fixed solutions. Refer
to "44.6.2 Accessing Initialisation for Real-
Time Rover Operations".
SHIFT INDIV (F5) and SHIFT RUN (F5)
To change between entering an individual
point ID different to the defined ID template and
the running point ID according to the ID
template. Refer to "19.1 ID Templates".
SHIFT QUIT (F6)
To exit Volumes calculations application
program. Available for OCUPY (F1) being
displayed.
1300