Logging Of Raw Obs - Leica GPS1200 Series Technical Reference Manual

19.5
Description
Access
Config...\Survey Settings...

Logging of Raw Obs

Logged raw observations are used for
• static and kinematic operations. With these operations, raw data is always post-proc-
essed in the office. Raw data must therefore be logged on both reference and rover
receivers.
• real-time operations
to check the work in the office by post-processing.
OR
to fill in gaps when a real-time position could not be calculated in the field. This can
happen due to problems with the real-time data reception.
Observations must be logged on all receivers which will be used for post-processing.
The settings on this screen define the logging of raw observations.
This menu option is licence protected and is only activated through a licence key. The licence
key can only be loaded from the CompactFlash card.
Select Main Menu: Config...\Survey Settings...\Logging of Raw Obs.
OR
Press a hot key configured to access the screen CONFIGURE Logging of Raw Obs.
Refer to "6.1 Hot Keys" for information on hot keys.
OR
Press USER. Refer to "6.2 USER Key" for information on the USER key.
OR
GPS1200 387