Leica GPS1200 Series Technical Reference Manual page 1189

Survey - General
Step Description
If required, add a code.
If required, add an annotation.
The position status icon changes to the code solution icon.
STOP (F1) is available but must not be pressed until the ambiguity
solution is gained.
The initialisation is gained when the ambiguities are solved. This is
indicated by the position status icon.
6. Any configurations for <Auto STOP:> in CONFIGURE Point Occu-
pation Settings are ignored. When the initialisation is gained, the
recording of positions stops automatically.
7. When <Auto STORE: No> in CONFIGURE Point Occupation
Settings, STORE (F1) to store the point information.
An average is automatically calculated with the known coordinates.
8. Continue with the surveying operation.
GPS1200
Refer to
chapter
11
44.4
19.6
19.6
1189