Leica GPS1200 Series Technical Reference Manual page 1104

Hide thumbs Also See for GPS1200 Series:

Table of Contents

Reference Plane

Edit a reference plane

step-by-step

<Offset PtID:> Available for <Define Offset: By Point ID>. Point ID

of offset point.

<Offset:> Distance by which to offset the plane along the Y axis.

For <Define Offset: By Distance> the distance can be entered.

For <Define Offset: By Point ID> the calculated distance to the

adjusted plane is displayed. <Offset:-----> if no values are available.

OFSET (F5) Available for <Offset PtID:> being highlighted. To

access REFPLANE Survey: XX, Survey page. Measure a point to

define the offset point.

PAGE (F6) to change to the Plot page.

REFPLANE New Reference Plane, Plot page

Points displayed depend on the settings in REFPLANE Configura-

tion, Parameters page. Points defining the plane are displayed in

black, the other points are displayed in grey.

SHIFT FACE (F1) to access the face view of the plane.

SHIFT PLAN (F1) to access the plan view of the plane.

STORE (F1) to compute and store the reference plane.

Refer to "42.2 Accessing Reference Plane" to access REFPLANE Reference

Plane Begin.

Show Quick Links

Table of Contents