Real-Time; Overview - Leica GPS1200 Series Technical Reference Manual

Config...\Interfaces... - General
22.3
22.3.1
Description
Access
Next step

Real-Time

Overview

The real-time interface allows real-time related parameters to be configured. This includes
defining if the receiver should work as a reference or a rover and the real-time messages to
be used. Up to two real-time interfaces can be configured on the receiver.
Select Main Menu: Config...\Interfaces.... Highlight Real-Time. EDIT (F3).
OR
Press a hot key configured to access the screen CONFIGURE Real-Time Mode. Refer
to "6.1 Hot Keys" for information on hot keys.
OR
Press USER. Refer to "6.2 USER Key" for information on the USER key.
OR
Within the configuration set wizard. Refer to "14.2 Accessing Configuration Set Manage-
ment".
Depending on the access, some options are not editable.
IF the real-time THEN
interface is
not to be used Refer to "22.3.2 Configuration without Real-Time Interface".
for a reference Refer to "22.3.3 Configuration of a Reference Real-Time Interface".
for a rover Refer to "22.3.4 Configuration of a Rover Real-Time Interface".
GPS1200 464