Config...\Interfaces... - General
22.14
Description
Technical specifica-
tions
Access
External Oscillator
The external oscillator option is available on the GRX1200 Pro and GRX1200 GG Pro.
An external oscillator can be used to provide a better quality time signal to the GRX1200
Pro/GRX1200 GG Pro than the internal clock, for example, through the use of a rubidium or
caesium oscillator. The same external oscillator can also be used with a number of receivers
so that each GRX1200 Pro/GRX1200 GG Pro is guaranteed to be tracking satellites using
the same time signal. An external oscillator is attached to the GRX1200 Pro/GRX1200 GG
Pro via the port OSC.
The settings on this screen define the parameters for incoming external oscillator signals.
Refer to the GPS1200 User Manual for technical specifications of the external oscillator port
and the required cable.
Select Main Menu: Config...\Interfaces.... Highlight Ext Osc EDIT (F3).
OR
Press a hot key configured to access the screen CONFIGURE External Oscillator. Refer
to "6.1 Hot Keys" for information on hot keys.
OR
Press USER. Refer to "6.2 USER Key" for information on the USER key.
GPS1200
550