Leica GPS1200 Series Technical Reference Manual page 542

Config...\Interfaces... - General
Field Option
Dynamic
Static
<Set IP Adr:> User input
<User ID:> User input
<(cont):> User input
<Password:> User input
GPS1200
Description
The IP address to get access to the Internet is
provided by the network provider dynamically. Each
time a GPS1200 receiver wants to access the
Internet via the device a new IP address is assigned
to the receiver. When using GPRS to connect to the
Internet then the network provider always dynami-
cally assigns the IP address.
The IP address to get access to the Internet is
provided by the network provider permanently. Each
time GPS1200 wants to access the Internet via the
device the same IP address identifies the receiver.
This is important if GPS1200 is used as a TCP/IP
server. This option should only be selected if a static
IP address is available for the receiver.
Available for <IP Address: Static>. To set the IP
address.
Some providers ask for a user ID to allow connecting
to the Internet via GPRS. Contact your provider if a
user ID needs to be used.
Allows the <User ID:> string to continue onto a new
line.
Some providers ask for a password to allow
connecting to the Internet via GPRS. Contact your
provider if a password is required.
542