Survey - Auto Points
Step
Description
<Horiz Offset: -3.0000>
<Height Offset: 0.3000>
<Identifier: OS>
<Prefix/Suffix: Suffix>
12.
CONT (F1) closes the screen and returns to SURVEY Survey: Job Name, Auto
page.
13.
SURVEY Survey: Job Name, Auto page
START (F1) starts logging of auto points and offset points.
14.
Walk along the centre line of the road as far as points need to be picked up.
OCUPY (F3) to store an auto point at any time.
OFST1 (F4) to change the offset or the height difference between the auto points
on the centre line and the right side of the road.
OFST2 (F5) to change the offset or the height difference between the auto points
on the centre line and the left side of the road.
15.
STOP (F1) ends recording of auto points and offset points.
The stopping of auto points is indicated in the position mode icon.
16.
After finishing the survey, import the data into a CAD package. If the offset point
ID's or codes fulfil the requirements of the CAD package, the offset points to the
right and to the left of the road are automatically strung together.
GPS1200
1216