Leica GPS1200 Series Technical Reference Manual page 598

Config...\Interfaces... - Controlling Devices
Configure SMARTgate
connection step-by-
step
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. Refer to "22.2 Accessing Configuration Interfaces" to access
CONFIGURE Interfaces.
2. In CONFIGURE Interfaces highlight an interface which has a
SMARTgate box attached.
3. CTRL (F4) to access CONFIGURE SMARTgate Connection.
4. CONFIGURE SMARTgate Connection
<Profile:> List of user profiles that can be used.
<Profile No.:> Number of the profile selected in <Profile:>.
<Ref Select:> The way in which the reference station is selected.
<Ref Select: Profile> selects a reference station according to a
given profile. <Ref Select: Frequency> to input a frequency different
to that specified by the user profile. <Ref Select: Phone No> to input
a phone number different to that specified by the user profile. <Ref
Select: Station No> to input a station number different to that spec-
ified by the user profile.
<XX:> Available for <Ref Select: Frequency>, <Ref Select: Phone
No> and <Ref Select: Station No> to input the values different to
those present in the user profile.
5. CONT (F1) returns to CONFIGURE Interfaces screen.
GPS1200 598
Refer to
chapter
23