Leica GPS1200 Series Technical Reference Manual page 519

Config...\Interfaces... - General
Field Option
All Points
Occupy Pts Only
Auto Pts Only
<Rate:> From 0.05s to
3600.0s
<CQ Control:> None, Pos Only,
Height Only or
Pos & Height
<Maximum User input
CQ:>
Next step
Step Description
1. CONT (F1) returns to CONFIGURE NMEA Messages.
Description
The NMEA message is sent when any type of point is
stored.
The NMEA message is sent when a manually occu-
pied point is stored.
The NMEA message is sent when auto points are
stored.
Available unless <Output: On Point Stored>.
Defines the time intervals at which the NMEA
messages are created. The maximum rate using
Bluetooth on RX1250 is 0.2 s.
Available unless <Output: On Point Stored>.
Activates a control over the coordinate quality. NMEA
messages are not output, if the coordinate quality of
the position and/or height component exceeds the
limit as defined in <Maximum CQ:>.
Available unless <CQ Control: None>.
The limit for the coordinate quality up to which NMEA
messages are output.
GPS1200 519