Leica GPS1200 Series Technical Reference Manual page 1166

Survey - General
Step Description
4. CONT (F1) to access SURVEY Survey: Job Name.
Using the coordinates of the current navigation position
Step Description
1. Refer to paragraph "Access step-by-step" to access SURVEY Set Up
Reference Station.
2. HERE (F4) to access SURVEY New Reference Point.
3. SURVEY New Reference Point, Coords page
The current navigation position in grid is displayed. When no local
coordinate system is active, WGS 1984 coordinates are displayed.
Type in a point ID for this new point.
COORD (F2) views other coordinate types. Local coordinates are
available when a local coordinate system is active.
SHIFT ELL H (F2) and SHIFT ORTH (F2). Available for local
geodetic coordinates. Changes between the ellipsoidal and the ortho-
metric height.
4. PAGE (F6) changes to the Code page.
5. SURVEY New Reference Point, Code page
GPS1200 1166
Refer to
chapter
SURVEY
Survey: Job
Name.
Refer to
chapter
19.3