Dividing An Area - Leica GPS1200 Series Technical Reference Manual

COGO
37.11.3
Access
COGO
Define How to Divide
Area,
Input page

Dividing an Area

Refer to "37.11.2 Choosing an Area to be Divided" to access COGO Define How to Divide
Area.
After each change of parameters in this screen, the values in the output fields are recalcu-
lated and updated.
GPS1200
CALC (F1)
To perform the area division and to continue
with the subsequent screen. Calculated COGO
points are not yet stored.
INV (F2)
To calculate the value for the distance from two
existing points. Available if <HDist-XX:> is
highlighted.
SIZE (F3) and PERC (F3)
To display the size and the percentage of the
sub-area.
LAST (F4)
To select the value for the distance from
previous COGO inverse calculations. Available
if <HDist-XX:> is highlighted.
SURVY (F5)
To manually occupy a point for the COGO
calculation. Available if <Point A:>, <Point
B:>, <Rotation Pnt:> or <Through Point:> is
highlighted.
PAGE (F6)
To change to another page on this screen.
900