Leica GPS1200 Series Technical Reference Manual page 1230

Survey - Hidden Points
Step Description
Type in an azimuth. When a hidden point measurement device is
attached to the receiver to measure the azimuth, the value is auto-
matically transferred.
SUN (F3) when <Azimuth:> is highlighted. The azimuth from the
direction of the sun to <Point A:> is computed.
AZMTH (F4) when <Azimuth:> is highlighted. To select or manually
occupy an auxiliary point and to compute the azimuth.
EAO (F2) available for <EAO Method: New for Each Point> or
<EAO Method: Permanent> in CONFIGURE Hidden Point Device
Offsets. To change or enter an External Angle Offset.
4. HIDDEN PT Hidden Point Measurement
<Point B:> The point ID of the current position. This is the second
known point for the calculation of the hidden point.
The procedure of measuring the hidden point from <Point B:> is the
same as from <Point A:>. Repeat steps 2. and 3.
5. CALC (F1) calculates the hidden point and displays the results in
HIDDEN PT Hidden Point Result, Result page.
6. HIDDEN PT Hidden Point Result, Result page
<Point ID:> The identifier for the hidden point. The configured point
ID template is used. The ID can be changed.
<Check Dist AB:> The computed horizontal distance between
<Point A:> and <Point B:>.
GPS1200 1230
Refer to
chapter
46.4.1.
46.4.2.
22.7