Smartantenna - Leica GPS1200 Series Technical Reference Manual

22.10
Description
Establish connection
automatically
Config...\Interfaces... - General

SmartAntenna

The SmartAntenna interface is used to send the measurement data from the SmartAntenna
to the RX1250.
The settings on this screen define the port and the device through which a connection to the
SmartAntenna should be established.
The configuration of a SmartAntenna interface is only possible for RX1250.
Automatic connection
Establishing a connection is initiated automatically upon
switching on RX1250.
OR
double clicking the icon
Requirements
The SmartAntenna interface is configured such that SmartAntenna is being used via
Bluetooth.
AND
An <ID Address:> is available.
AND
A SmartAntenna is found that matches <ID Address:> configured. This can be the last
used <ID address:>.
If one of these requirements is not fulfilled, a search for a SmartAntenna is performed.
on Windows CE desktop to display the Leica software.
GPS1200 537