Leica GPS1200 Series Technical Reference Manual page 481

Config...\Interfaces... - General
Two real-time devices can be attached to two different ports, for example a radio and a digital
cellular phone. Due to the nature of a rover, the two devices cannot operate simultaneously.
It is recommended to choose two different configuration sets, one for each real-time device.
Change the configuration set to change the active device.
Description of fields
Field Option
<R-Time None, Reference
Mode:> or Rover
<R-Time Leica
Data:> CMR/CMR+
RTCM v3
RTCM 1,2 v2
RTCM 9,2 v2
RTCM 18,19 v2
RTCM 20,21 v2
WAAS/EGNOS/M
SAS, EGNOS,
WAAS, MSAS,
EGNOS (Test) or
WAAS (Test)
Description
<R-Time Data: Rover> activates a rover real-time
interface.
Refer to "22.3.3 Configuration of a Reference Real-
Time Interface" for information about these real-time
data formats.
The availability of the following options depend on the
selection made for <SBAS Tracking:> in
CONFIGURE SBAS Tracking Mode. Refer to
"22.3.6 Configuration of SBAS".
Wide Area Augmentation System
European Geostationary Navigation Overlay Service
MTSAT Satellite-based Augmentation System where
MTSAT stands for Multi-functional Transport SATel-
lite.
GPS1200 481