Initialise While Static - Leica GPS1200 Series Technical Reference Manual

Survey - General
44.6.4

Initialise while static

step-by-step
Initialise while Static
Step Description
1. Refer to "44.6.2 Accessing Initialisation for Real-Time Rover Opera-
tions" to access the initialisation.
2. Does the receiver currently have a fixed solution?
• If yes, continue with step 4.
• If no, continue with the next row.
The initialisation starts automatically.
3. Continue with step 7.
4. YES (F6) to start the initialisation. The current ambiguity solution is
discarded.
SURVEY Survey: Job Name
The position status icon changes to the code solution icon.
STOP (F1) is available but must not be pressed until the ambiguity
solution is gained.
The initialisation is gained when the ambiguities are solved. This is
indicated by the position status icon.
5. Any configurations for <Auto STOP:> in CONFIGURE Point Occu-
pation Settings are ignored. STOP (F1) when enough data is
collected.
GPS1200 1186
Refer to
chapter
19.6