Auto Points For Post-Processed Kinematic And Real-Time - Leica GPS1200 Series Technical Reference Manual

Survey - Auto Points
45.3
Requirements
Access step-by-step
Auto Points for
Post-Processed Kinematic and Real-Time Rover Oper-
ations
• <R-Time Mode: None> or <R-Time Mode: Rover> in CONFIGURE Real-Time Mode.
• <Log Auto Pts: Yes> in SURVEY Configuration, Auto Points page.
Step Description
1. Refer to "44.1 Accessing Survey" to access SURVEY Survey Begin.
2. In SURVEY Survey Begin select a job.
3. Select a configuration set with <R-Time Mode: None> or <R-Time Mode:
Rover>.
4. Select an antenna.
5. CONT (F1) to access SURVEY Survey: Job Name.
For <Start Logging: Immediately>, logging of auto points begins.
6. PAGE (F6) until the Auto page is visible.
GPS1200 1200