Configuration Of An Ascii Input Interface - Leica GPS1200 Series Technical Reference Manual

Config...\Interfaces... - General
22.4.2
Access
CONFIGURE
ASCII Input

Configuration of an ASCII Input Interface

Refer to "22.4.1 Overview" to access CONFIGURE ASCII Input.
Description of fields
Field Option
<Use Device:> Yes or No
<Port:> Bluetooth x
GPS1200
CONT (F1)
To accept changes and return to the screen
from where this screen was accessed.
ANNOT (F2)
To configure which ASCII messages to record
to which annotation. Refer to "22.4.3 Configu-
ration of Annotations".
DEVCE (F5)
Available unless <Device: NETx>. To create,
select, edit or delete a device. Refer to "23.2
Accessing CONFIGURE Devices /
CONFIGURE GPRS Internet Devices".
SHIFT CMND (F5)
To configure a message to be sent through the
configured port to the device. Refer to "22.4.4
Configuration of a Command to the Device".
Description
Activates the ASCII input interface.
Available for RX1250. The Bluetooth port which will
be used for the interface functionality.
502