Leica GPS1200 Series Technical Reference Manual page 1288

Survey Cross Section
Step Description
<Code: TB1>
Open the choicelist for <Templates:> to create a new cross section
template or to select or delete an existing template.
21. START (F4) to open the template.
22. Go to the beginning of the first cross section.
23. OCUPY (F1) to start the point occuaption.
24. STOP (F1) to stop the point occupation
25. STORE (F1) to store the element.
26. Repeat steps 23. to 25. for the remaining four elements.
27. Go to the position for the next cross section.
<Dist To Last:> displays the interval.
Since working in ZigZag mode, the next cross section starts "at the
end", this means with TB2.
28. Continue until all cross sections are surveyed.
29. END (F4) to close the template.
30. SHIFT QUIT (F6) to quit the screen.
GPS1200 1288
Refer to
chapter