Leica GPS1200 Series Technical Reference Manual page 482

Config...\Interfaces... - General
Field Option
<Port:> Bluetooth x
Clip-on
NETx
Port x
<ID Address:> Output
<Ref Sensor:> Choicelist
GPS1200
Description
Available for RX1250. The Bluetooth port which will
be used for the interface functionality.
Available for RX1250. The clip-on-contacts. It is used
for RX1250 with GHT56 when a device is attached to
the GHT56.
Available for an activated Internet interface. If these
ports are not assigned to a specific interface, then
these ports are additional remote ports.
The physical port P1, P2 or P3 on the instrument to
which the device is attached.
Available on RX1250 with <Port: Bluetooth x> and
a Bluetooth device being selected.
The ID address of the SmartAntenna to be used.
The receiver type used at the reference. If the real-
time data format does not contain the information of
the receiver type certain corrections based on the
information of the receiver type are applied in order to
provide correct results. The real-time data formats
Leica, CMR and CMR+ contain this information. This
is mainly important when a System300 receiver is
used as reference.
482