Configuration Of A Rover Real-Time Interface - Leica GPS1200 Series Technical Reference Manual

22.3.4
Access
CONFIGURE
Real-Time Mode
Config...\Interfaces... - General

Configuration of a Rover Real-Time Interface

Refer to "22.3.1 Overview" to access CONFIGURE Real-Time Mode.
The available fields and keys on this screen depend on the selected settings.
CONT (F1)
To accept changes and return to the screen
from where this screen was accessed.
ROVER (F2)
To configure additional settings relevant to
rover operations. Refer to paragraph
"CONFIGURE Additional Rover Options,
General page". Available unless a SBAS data
format has been selected for <R-Time Data:>.
Refer to "22.3.6 Configuration of SBAS" for
information on SBAS.
SRCH (F4)
Available on RX1250 with <Port: Bluetooth
x> and a Bluetooth device being selected. To
search for all available Bluetooth devices. If
more than one Bluetooth device is found a list
of available devices is provided.
DEVCE (F5)
To create, select, edit or delete a device. Refer
to "23.2 Accessing CONFIGURE Devices /
CONFIGURE GPRS Internet Devices". Avail-
able unless a SBAS data format has been
selected for <R-Time Data:>. Refer to "22.3.6
Configuration of SBAS" for information on
SBAS.
GPS1200 479