Leica GPS1200 Series Technical Reference Manual page 604

Config...\Interfaces... - Controlling Devices
Configure port NET
step-by-step
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. Refer to "22.2 Accessing Configuration Interfaces" to access
CONFIGURE Interfaces.
2. CONFIGURE Interfaces
Highlight an interface which has an Internet / Ethernet device
attached.
3. CTRL (F4) to access CONFIGURE Set NET Port.
4. CONFIGURE Set NET Port, General page
<Name:> The name of the port NET that was attached to the inter-
face that was highlighted when this page was accessed.
<User:> How the GPS1200 receiver will operate in the Internet.
<User: Client> must be selected when using NTRIP as Internet
application. Inside the Internet NTRIP Clients and NTRIP Servers are
considered as clients.
<Server:> The server to be accessed in the Internet. Opening the
choicelist accesses CONFIGURE Server to Connect where new
servers can be created and existing servers can be selected or
edited.
GPS1200 604
Refer to
chapter
23
34.1
24.11